Canyon Lake was 96.8% full on Nov. 14, while its elevation was 1.5 feet below the conservation pool. The Texas Water Development Board's storage figure and the U.S. Army Corps of Engineers' elevation reading describe the same reservoir in different units.
Residents can use these readings to check lake storage, lake elevation, springflow and ground dryness, each measured on its own scale. The Corps measured Canyon Lake at 907.5 feet above sea level at 2 a.m. CST on Nov. 14, compared with its 909-foot conservation pool.
Lake storage and elevation
The 96.8% figure measures how much of Canyon Lake's conservation storage was filled on Nov. 14. The Corps' 907.5-foot figure measures the height of the lake surface, not the percentage of storage filled. Its 1.5-foot difference is measured against the conservation-pool elevation, not against the depth of the entire lake.
Aquifer and springflow
The Edwards Aquifer Authority reported a Nov. 13 ten-day average of 643 feet above sea level at its J-17 monitoring well. That is an aquifer-level reading at a well, not Canyon Lake's surface elevation.
The authority also reported a ten-day average of 165 cubic feet per second at Comal Springs. Cubic feet per second measures the volume of water flowing past a point each second; it is not a lake level or a reservoir-storage percentage. The authority's single-day springflow reading was 160 cubic feet per second.
